Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-172
continued
wlan.ip.protocol
type: getvar; setvar
This parameter configures the IP addressing method used by the wireless print server.
getvar result IP protocol value.
Example
Description Gets the value of the currently selected IP protocol used by the
wireless print server.
Syntax ! U1 getvar “wlan.ip.protocol”
Result “all”
setvar choices
Values: “bootp” = uses the standard bootp addressing method to obtain an IP
address and configuration; “dhcp” = uses the standard dhcp addressing method
to obtain an IP address and configuration for a server specified period of time;
“rarp” = uses the standard rarp addressing method to obtain an IP address;
“glean only” = uses the IP address from a PING packet that is sent to its hardware
address (unicast address); “permanent” = uses static values assigned through
other commands; “all” = tries all of the dynamic addressing methods, not
permanent, to obtain an IP address.
Default “all”
Example
Description Sets the IP addressing method used by the wireless print
server.
Syntax ! U1 setvar “wlan.ip.protocol” “all”
Loading ...
Loading ...
Loading ...