Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-158
continued
wlan.ip.addr
type: getvar; setvar
This parameter allows you to get or set the wireless print server’s IP address.
getvar result Wireless print server IP address
Example
Description Gets current wireless print server IP address
Syntax ! U1 getvar “wlan.ip.addr”
Result “0.0.0.0”
setvar choices
Values: any valid IP address.
Default “0.0.0.0”
Example
Description Sets current wireless print server IP address upon power up
Syntax ! U1 setvar “wlan.ip.addr” “0.0.0.0”
wlan.ip.netmask
type: getvar; setvar
This parameter refers to the wireless print server’s subnet mask address. This value is ignored if the IP
protocol is not set to permanent.
getvar result Wireless print server’s subnet mask
Example
Description Gets wireless print server’s subnet mask
Syntax ! U1 getvar “wlan.ip.netmask”
Result “255.255.255.0”
setvar choices
Values: any valid subnet mask.
Default “255.255.255.0”
Example
Description Sets wireless print server’s subset mask
Syntax ! U1 setvar “wlan.ip.netmask” “255.255.255.0”
Loading ...
Loading ...
Loading ...