Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 12
Wireless
Network
Printers
pg. 12-8
Setting the IP Address for Network Printers
1. Create the following document in a text editor such as Notepad, replacing (192.0.11.195) with
your Network Printer’s address, and (ZebraNet) with the SSID of your RF Access Point. It may be
necessary to obtain this information from your network administrator:
! UTILITIES
LAN IPADDR 192.0.11.195 SSID ZebraNet MODE LPD
PRINT
Insure each line, including the last, is terminated with <CRLF>. Save the file in a convenient location.
2. Using a serial communications cable (p/n BL11757-000), connect the printer to the serial port of a
PC loaded with the Label Vista™ program. Open Label Vista and select the “Diagnostic Send” utility
under the Printer menu.
3. Use the “Browse” button to navigate to the file you created in step 1 and click on the “Send” button.
The file will be sent to the printer, and the dialog box will indicate the download progress.
Once the IP address has been downloaded successfully, it will stay resident in the printer’s memory until
a new IP address is sent. The IP address can be verified by performing a “2 key reset” on the printer.
The “2 key reset” is initiated by the following key sequence:
1 Press the “FEED” key,
2 While still holding down the “FEED” key, press and release the “ON/OFF” key (Cameo 3N) or the “On”
key (Encore 3N).
3 Keep the “FEED” key depressed until printing starts.
The printer will produce a line of interlocking “x” characters to insure all elements of the printhead are
working, and then print out a status report.
The resulting printout should include a Wireless Communications section. You should verify that the
following lines are included, with your IP address and SSID:
continued
Loading ...
Loading ...
Loading ...