Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-202
continued
names must be in 8.3 format. The time stamp of any files in the commands/ subdirectory will be
compared to those of commands which were last executed on the printer. Any command files that
have never been run or have a more recent time stamp than those on the printer will be downloaded
and executed on the printer.
It may be useful to put a label command in the most recent command file. This will provide visual
feedback that the printer successfully performed the mirror process. For example, the example below
could be the contents of a command file:
! U1 setvar “wlan.essid” “myessid”
! U1 setvar “wlan.encryption_mode” “128-bit”
! U1 setvar “wlan.auth_type” “shared”
! U1 setvar “wlan.encryption_index” “1”
! U1 setvar “wlan.encryption_key1” “12345678901234567890123456”
! U1 setvar “wlan.encryption_key2” “23456789012345678901234567”
! U1 setvar “wlan.encryption_key3” “34567890123456789012345678”
! U1 setvar “wlan.encryption_key4” “45678901234567890123456789”
! U1 setvar “ip.mirror.auto” “o”
! 0 200 200 240 1
LABEL
PAGE-WIDTH 600
T 0 3 84 17 Network settings updated
FORM
PRINT
In this example the printer will print a label with the text “Network settings updated” after it downloads
this file and updates its network settings.
Refer to the following pages for exposition of the ip.mirror variables.
Loading ...
Loading ...
Loading ...