Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-142
continued
wlan.encryption_mode
type: getvar; setvar
This parameter refers to WEP (Wired Equivalent Privacy) encryption. This parameter enables and
disables the printer’s WEP encryption. When using WEP encryption make sure that the encryption key
matches the wireless network WEP encryption key.
NOTES: 1. When using encryption, make sure that the encryption key is set properly. The encryption key and the encryption index
should match the encryption key and encryption index of the access point (or the other network devices when in AD HOC mode).
When all settings are changed the printer must be wlan.kerberos.mode
2. 128 bit encryption is not supported on units with Frequency Hopping Spread Spectrum (FHSS) radios. 40 bit encryption will be
used instead.
getvar result Returns the type of encryption that is currently being used by the printer.
Example
Description Instructs the printer to respond with the encryption value.
Syntax ! U1 getvar “wlan.encryption_mode”
Result “40-bit”
setvar choices
“off”, “40-bit”, and “128-bit”
Default “off”
Example
Description This command instructs the printer to turn encryption off
Syntax
! U1 setvar “wlan.encryption_mode” “off”
Result Sets the encryption mode to off
Loading ...
Loading ...
Loading ...