ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 8

Advanced

Commands

pg. 8-20

PRESENTAT Command

The PRESENT-AT command can be used to position the media at the tear bar of the printer or at a

location where the printed label can be easily removed by the operator. When a PRESENT-AT command is

issued, the printer will print a label and then, after a delay period, advance the media a specified distance.

It will then retract the media the same distance before starting a new print job.

The “delay” parameter is used to avoid unnecessary advance/retract operations when printing a batch

of print jobs. The PRESENT-AT command can be issued in a label file or in a utilities command session

(!UTILITIES…PRINT)

Caution: When using this command an added buer area of 18 dots should be applied to the leading and trailing edges of the label.

Registration between any preprinting graphics on the media and the le being printed may vary from label to label .

Format:

{command} {length} {delay}

where:

{command}: PRESENT-AT

{length}: Unit length in dot-lines the media is advanced after printing and retracted before

printing the next label.

{delay}: The interval after printing the label the printer waits prior to advancing the media.

Increments are in 1/8 of a second. A delay of “1” is equivalent to 1/8

of a second. A delay of “4”

is equivalent to 1/2 second, etc.

continued

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth