Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-195
continued
rd.tag.test
Type: setvar
This command refers to the RFID tag test results via the display.
setvar choices “quick”, “slow”
Example 1
Description
This parameter will perform a quick RFID test which will show a pass
or fail message
Syntax ! U1 setvar “rfid.tag.test” “quick”
Result
Printer performs a quick RFID test. Display will show a “PASS” or
“FAIL” message
Example 2
Description
This will perform a slow RFID test which will show each read or write
tag operation’s success or failure
Syntax ! U1 setvar “rfid.tag.test” “slow”
Result
Printer performs a slow RFID test. Display will show the success or
failure of each read or write tag operation
rd.tag.type
Type: getvar; setvar
This parameter refers to the RFID reader’s tag type configuration.
getvar result Returns the reader’s tag type configuration.
Example Description This example retrieves the RFID reader’s tag
type
Syntax ! U1 getvar “rfid.tag.type”
Result “gen2”
setvar choices
“gen2”
Default “gen2”
Example Description This example sets the RFID reader’s tag type
Syntax ! U1 setvar “rfid.tag.type” “gen2”
Result Reader’s tag type is set to “gen2”
Loading ...
Loading ...
Loading ...