Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 9
Line Print
Mode
pg. 9-5
SETLP Command
Selecting the line printer font (the SETLP command) will change the font the printer uses for line print
mode. It also chooses the amount of space the printer will move down when the printer recieves a
carriage return (hex value 0x0d).
! U1 SETLP {font name or number} {size} {unit height}
The {unit height} value should be set to the actual height of the font being used. Refer to Appendix C of
this manual for actual resident font height values.
SETLP allows you to use either the resident fonts or pre-scaled fonts downloaded to the flash memory.
The Label Vista design software can create and upload a font for the printer from any available TrueType
1
font. Appendix D contains a table of all resident font heights and their proper unit height.
You can set the printer font multiple times when using the line printer to make a receipt. For example, to
put the company name in a larger font at the top of a label, change to font 5 size 2 and then to font 7 size 0.
SET LP Command Example
Input:
! U1 SETLP 5 2 46
AURORA’S FABRIC SHOP
! U1 SETLP 7 0 24
123 Castle Drive, Kingston, RI 02881
(401) 555-4CUT
Output:
Loading ...
Loading ...
Loading ...