Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 2
Printer
Commands
pg. 2-2
Printer Commands
Format:
<!> {oset} <200> <200> {height} {qty}
where:
<!>: Use ‘!’ to begin a control session.
{offset}:The horizontal offset for the entire label. This value causes all fields to be offset horizontally
by the specified number of UNITS.
<200>:Horizontal resolution (in dots-per-inch).
<200>:Vertical resolution (in dots-per-inch).
{height}:The maximum height of the label.
The maximum label height is calculated by measuring from the bottom of the first black bar
(or label gap) to the top of the next black bar (or label gap). Then 1/16” [1.5mm] is subtracted
from this distance to obtain the maximum height. (In dots: subtract 12 dots on 203 d.p.i
printers; 18 dots on 306 d.p.i. printers)
{qty}: Quantity of labels to be printed. Maximum = 1024.
continued
1
st
black bar or gap
2
nd
black bar or gap
Max. label height “d”=
“h” - .062” [1.5mm]
“h” = height
between black bars
Loading ...
Loading ...
Loading ...