Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-131
continued
ip.snmp.create_mib
type: do
This parameter refers to creating a file of the printer’s MIB.
do parameters Filename (NOTE: The filename is up to eight characters in length with a three-
character extension)
Example
Description This command instructs the printer to create an SNMP MIB
file based in the current set/get parameters in the printer’s
application. The file will be stored on the printer’s file system
with the filename supplied as the parameter in the do command.
The MIB file can then be retrieved (via Label Vista, FTP, or other
wired /wireless connection to the printer) and passed onto
any SNMP-based utility to provide a means to monitor and
configure all the printer’s parameters via SNMP.
Syntax ! U1 do “ip.snmp.create_mib” “EXAMPLE1.MIB”
Result EXAMPLE1.MIB will be created in the printer’s file system with
the printer MIB information stored in it
ip.tcp.enable
type: getvar; setvar
This parameter refers to the TCP socket protocol.
getvar result Returns the TCP protocol status. (on or off)
Example
Description Instructs the printer to respond with the TCP setting
Syntax ! U1 getvar “ip.tcp.enable”
Result “on”
setvar choices
“on”, “off”
Default “on”
Example
Description Instructs the printer to enable the TCP protocol
Syntax ! U1 setvar “ip.tcp.enable” “on”
Result The TCP protocol will be turned on upon cycling the power or
issuing “device.reset”
Loading ...
Loading ...
Loading ...