Loading ...
Loading ...
Loading ...
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-28
continued
device.uptime
type: getvar
This parameter identifies the amount of time the printer has been powered on. The string format is: xx
days, xx hours, xx minutes, and xx seconds.
getvar result The time printer has been powered on.
Example
Description
Retrieves the amount of time the printer has been
powered on. It responds in the following format
(days, hours, minutes, and seconds).
Syntax ! U1 getvar “device.uptime”
Result Time printer has been powered on.
device.frontpanel.line1
type: getvar; setvar
This parameter overrides the content that is shown on the first line of the front panel when the printer is
showing the idle display.
getvar result The content on line one of the front panel.
Example
Description Retrieves the content that shows on line one of the front panel.
Syntax ! U1 getvar ”device.frontpanel.line1”
Result “ “
setvar choices
Values: The maximum amount of alphanumeric ASCII characters available for line
one on the printer’s front panel.
Default “ “
Example
Description
Instructs the printer to set the content that shows on line one of
the front panel.
Syntax ! U1 setvar “device.frontpanel.line1” “value”
Loading ...
Loading ...
Loading ...