ZEBRA MZ 320 Programming Manual

Loading ...

Mobile Printing Systems

CPCL Programming Manual

Section 10

Advanced

Utilities

pg. 10-38

continued

DENSO BHT COMMANDS

NOTE: All commands in this section are compatible with ACKNAK-IT v 6.1 or greater.

Zebra mobile printers can have an application downloaded which will support communications to the

Denso Barcode Handy Terminal (BHT).

The different methods of communications between a BHT and a Zebra mobile printer are per the table

below:

Connection/protocol type Refer to

AUTOEXEC.BAT

File

pg. no

Cable IR

Cable w/BHT PROBHT.CBL P10-52

IR w/

BHT

PROBHT.IR P10-52

Cable w/

BHT-IR

PROBHTIR.CBL P10-53

IR w/

BHT-IR

PROBHTIR.IR P10-53

Data is sent to the printer formatted as a BHT .DAT file. The printer will check for the “.DAT” filename

extension.

Since the format of data using this protocol is not always what the printer requires, there are several

modes of operation that can be set within the printer to specify how record data fields delivered by the

protocol are interpreted.

Setting the Data Format

If the default mode (strip trailing spaces then add CR/LF for each data field) is not desired, any of the

operating modes can be set by loading an AUTOEXEC.BAT command file into the printer’s flash memory.

Note that any commands intended to modify the BHT operating modes must be placed between the

SRF-ACCESS and the END-SRF-ACCESS command lines.

Mode 1: (Default) Strip trailing spaces and add CR/LF

Each data field in a record has any trailing spaces stripped and a CR/LF (carriage return/line feed) pair

Loading ...

ZEBRA MZ 320 3" 4mb Direct Mobile Thermal Receipt Printer With Bluetooth