Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
48
Telnet/Web
This window is used to display and configure Telnet and Web settings on the Switch.
To view the following window, click Management > Telnet/Web, as shown below:
Figure 4-23 Telnet/Web Window
The fields that can be configured in Telnet Settings are described below:
Parameter Description
Telnet State Select to enable or disable the Telnet server feature here.
Port Enter the TCP port number used for Telnet management of the Switch. The
well-known TCP port for the Telnet protocol is 23.
Click the Apply button to accept the changes made.
The fields that can be configured in Source Interface are described below:
Parameter Description
Source Interface State Select to enable or disable the source interface’s state here.
Type Select the type of source interface that will be used here. Options to choose
from are Loopback, Mgmt, and VLAN.
VID
Enter the interface ID here. For loopback interfaces the range is from 1 to 8.
For the management (Mgmt) interface this value can only be 0. For VLAN
interfaces the range is from 1 to 4094.
Click the Apply button to accept the changes made.
The fields that can be configured in Web Settings are described below:
Parameter Description
Web State Select this option to enable or disable the configuration through the web.
Port Enter the TCP port number used for Telnet management of the Switch. The
well-known TCP port for the Telnet protocol is 80.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...