Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
202
Figure 6-188 RIP Distribute List Window
The fields that can be configured are described below:
Parameter Description
ACL Name
Enter the access list name that will be used here. This name can be up to 32
characters long.
Interface Name Enter the interface name that will be used here. This name can be up to 12
characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RIP Interface Settings
This window is used to display and configure the RIP interface settings.
To view the following window, click L3 Features > RIP > RIP Interface Settings, as shown below:
Figure 6-29 RIP Interface Settings Window
The fields that can be configured are described below:
Parameter Description
Network Enter the IPv4 network address used by RIP here. Interfaces that have a
subnet belonging to the network specified here will be activated for RIP.
Passive Interface
Select to enable or disable the passive interface feature here. This feature is
used to disable the sending and receiving of routing updates on an interface.
However, RIP packets from other routers received on this interface will continue
to be processed.
Enter the name of the passive interface in the space provided. This name can
be up to 12 characters long.
Select the Default option to use this as the default for all interfaces.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...