Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
398
To view the following window, click OAM > Ethernet OAM > Ethernet OAM DULD Settings, as shown below:
Figure 10-26 Ethernet OAM DULD Settings Window
The fields that can be configured in Ethernet OAM DULD Settings are described below:
Parameter Description
Recovery Time
Enter the time interval value used by DULD to decide how long to recover the
disabled port here. When the timer has expired, the disabled port by DULD will
be recovered automatically. 0 represents that this function is disabled. This
value is either 0 seconds or in the range from 60 to 1000000 seconds.
Unit Select the Switch unit ID that will be used here.
From Port - To Port Select the Switch port range that will be used here.
Admin State
Select to enable or disable the admin state here. This feature is used to enable
Ethernet OAM unidirectional link detection on the specified port(s).
Action Select the action that will be taken here. Options to choose from are Normal
and Shutdown.
Discovery Time Enter the discovery time value here. The range is from 5 to 65535 seconds. By
default, this value is 5 seconds. If the OAM discovery does not successfully
negotiate before discovery time expired, OAM unidirectional link detection will
start.
Click the Apply button to accept the changes made.
The fields that can be configured in Ethernet OAM DULD Table are described below:
Parameter Description
Unit Select the Switch unit ID that will be used here.
From Port - To Port Select the Switch port range that will be used here.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
Loading ...
Loading ...
Loading ...