Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
43
To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below:
Figure 4-14 SNMP Host Table Settings Window
The fields that can be configured are described below:
Parameter Description
Host IPv4 Address Enter the IPv4 address of the SNMP notification host.
Host IPv6 Address Enter the IPv6 address of the SNMP notification host.
User-based Security Model
Select the security model here. Options to choose from are SNMPv1,
SNMPv2c, and SNMPv3.
• SNMPv1 - Select to allow the group user to use the SNMPv1 security
model.
• SNMPv2c - Select to allow the group user to use the SNMPv2c security
model.
• SNMPv3 - Select to allow the group user to use the SNMPv3 security
model.
Security Level When selecting SNMPv3 in the User-based Security Model drop-down list,
this option is available.
• NoAuthNoPriv - Specify that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
• AuthNoPriv - Specify that authorization will be required, but there will be
no encryption of packets sent between the Switch and a remote SNMP
manager.
• AuthPriv - Specify that authorization will be required, and that packets
sent between the Switch and a remote SNMP manger will be encrypted.
UDP Port Enter the UDP port number. The default trap UDP port number is 162. The
range of UDP port numbers is from 1 to 65535. Some port numbers may
conflict with other protocols.
Community String /
SNMPv3 User Name
Enter the community string or SNMPv3 user name to be sent with the
notification packet.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Loading ...
Loading ...
Loading ...