Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
46
After clicking the Show Detail button, the following window will appear.
Figure 4-19 RMON History Settings (Show Detail) Window
Click the Back button to return to the previous window.
RMON Alarm Settings
This window is used to display and configure alarm entries to monitor an interface.
To view the following window, click Management > RMON > RMON Alarm Settings, as shown below:
Figure 4-20 RMON Alarm Settings Window
The fields that can be configured are described below:
Parameter Description
Index Enter the alarm index. The range is from 1 to 65535.
Interval
Enter the interval in seconds for the sampling of the variable and checking
against the threshold. The valid range is from 1 to 2147483648 seconds.
Variable Enter the object identifier of the variable to be sampled.
Type Select the monitoring type. Options to choose from are Absolute and Delta.
Rising Threshold Enter the rising threshold value between 0 and 2147483647.
Falling Threshold Enter the falling threshold value between 0 and 2147483647.
Rising Event Number Enter the index of the event entry that is used to notify the rising threshold
crossing event. The valid range is from 1 to 65535. If not specified, no action is
taken while crossing the ringing threshold.
Falling Event Number Enter the index of the event entry that is used to notify the falling threshold
crossing event. The valid range is from 1 to 65535. If not specified, no action is
taken while crossing the falling threshold.
Owner Enter the owner string up to 127 characters.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Loading ...
Loading ...
Loading ...