Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
149
This window is used to display and configure the link aggregation settings.
To view the following window, click L2 Features > Link Aggregation, as shown below:
Figure 5-591 Link Aggregation Window
The fields that can be configured for Link Aggregation are described below:
Parameter Description
System Priority Enter the system priority value used here. This value must be between 1 and
65535. By default, this value is 32768. The system priority determines which
ports can join a port-channel and which ports are put in the stand-alone mode.
The lower value has a higher priority. If two or more ports have the same
priority, the port number determines the priority.
Load Balance Algorithm Select the load balancing algorithm that will be used here. Options to choose
from are Source MAC, Destination MAC, Source Destination MAC, Source
IP, Destination IP, Source Destination IP, Source L4 Port, Destination L4
Port, and Source Destination L4 Port. By default, this option is Source
Destination MAC.
Click the Apply button to accept the changes made.
The fields that can be configured for Channel Group Information are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the list of ports that will be associated with this configuration here.
Group ID
Enter the channel group number here. This value must be between 1 and 32.
The system will automatically create the port-channel when a physical port first
joins a channel group. An interface can only join one channel-group.
Mode Select the mode option here. Options to choose from are On, Active, and
Passive. If the mode On is specified, the channel group type is static. If the
mode Active or Passive is specified, the channel group type is LACP. A
channel group can only consist of either static members or LACP members.
Once the type of channel group has been determined, other types of interfaces
cannot join the channel group.
Click the Add button to add a new channel group.
Click the Delete Member Port button, to delete the member port(s) specified from the group.
Click the Delete Channel button to delete the specified channel group.
Click the Show Detail button to view more detailed information about the channel.
Loading ...
Loading ...
Loading ...