Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
330
Parameter Description
MAC Select the type of sender MAC address that will be used here. Options to
choose from are Any, Host, and MAC with Mask.
Sender MAC After selecting the Host or MAC with Mask options as the type of MAC, enter
the sender MAC address used here.
Sender MAC Mask
After selecting the MAC with Mask option as the type of MAC, enter the
sender MAC mask used here.
Click the Back button to return to the previous page.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
ARP Inspection Settings
This window is used to display and configure the ARP inspection settings.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Inspection
Settings, as shown below:
Figure 9-46 ARP Inspection Settings Window
The fields that can be configured in ARP Inspection Validation are described below:
Parameter Description
Src-MAC Select to enable or disable the source MAC option here. This option specifies to
check for ARP requests and response packets and the consistency of the
source MAC address in the Ethernet header against the sender MAC address
in the ARP payload.
Dst-MAC
Select to enable or disable the destination MAC option here. This option
specifies to check for ARP response packets and the consistency of the
destination MAC address in the Ethernet header against the target MAC
address in the ARP payload.
IP
Select to enable or disable the IP option here. This option specifies to check the
ARP body for invalid and unexpected IP addresses. It also specifies to check
the validity of IP address in the ARP payload. The sender IP in both the ARP
request and response and target IP in the ARP response are validated. Packets
destined for the IP addresses 0.0.0.0, 255.255.255.255, and all IP multicast
Loading ...
Loading ...
Loading ...