Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
289
Extended Expert ACL
After selecting an Extended Expert ACL and clicking the Add Rule button, the following page will appear.
Figure 8-16 Extended Expert ACL (Add Rule) Window
The fields that can be configured are described below:
Parameter Description
Sequence No. Enter the sequence number of this ACL rule here. The range is from 1 to
65535. If this value is not specified, the system will automatically generate an
ACL rule number for this entry.
Action Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Protocol Type Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, EIGRP (88), ESP (50), GRE (47), IGMP (2), OSPF (89), PIM (103),
VRRP (112), IP-in-IP (94), PCP (108), Protocol ID, and None.
• Value - The protocol ID can also manually be entered here. The range
is from 0 to 255.
• Mask - After selecting the Protocol ID option, manually enter the
protocol mask value here. The range is from 0x0 to 0xFF.
• Fragments - Select this option to include packet fragment filtering.
Source Select and enter the source IP information here. Options to choose from are
Any, Host, and IP.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the source host IP address
here.
• When the IP option is selected, the Wildcard option will also be
available. Enter the group of source IP addresses by using a wildcard
bitmap. The bit corresponding to the bit value 1 will be ignored. The bit
corresponding to the bit value 0 will be checked.
Destination
Select and enter the destination IP information here. Options to choose from
are Any, Host, and IP.
Loading ...
Loading ...
Loading ...