Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
199
Figure 6-155 Route Preference Window
The fields that can be configured are described below:
Parameter Description
Distance Default Enter the administrative distance of default routes here. The range is from 1 to
255. By default, this value is 1.
Distance Static
Enter the administrative distance of static default routes here. The range is from
1 to 255. By default, this value is 60.
Click the Apply button to accept the changes made.
ECMP Settings
This window is used to display and configure the Equal-Cost Multi-Path (ECMP) routing settings. This is used to
configure the load balancing hash algorithm and used to determine the next hop entry for multiple paths destined for
the same destination.
To view the following window, click L3 Features > ECMP Settings, as shown below:
Figure 6-166 ECMP Settings Window
The fields that can be configured in ECMP Load Balancing Settings are described below:
Parameter Description
Destination IP Select this option to use the destination IP address as the ECMP hash key.
Source IP Select this option to use the least significant bits of the source IP address as
the ECMP hashing algorithm.
CRC 32 Lower Select this option to use the lower bits of CRC-32 as the ECMP hashing
algorithm.
CRC 32 Upper Select this option to use the upper bits of CRC-32 as the ECMP hashing
algorithm.
TCP/UDP Port Select this option to use TCP/UDP port number as ECMP hash key.
Click the Apply button to accept the changes made.
The fields that can be configured in ECMP Advance Control Mode are described below:
Loading ...
Loading ...
Loading ...