Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
33
To view the following window, click Management > Password Encryption, as shown below:
Figure 4-4 Password Encryption Window
The fields that can be configured are described below:
Parameter Description
Password Encryption
State
Select this option to enable or disable the encryption of the password before being
stored in the configuration file.
Password Type When the state is enabled, select the password encryption type here. Options to
choose from are:
• Encrypted-SHA1 - Specifies that the password is encrypted using SHA-1.
• Encrypted-MD5 - Specifies that the password is encrypted using MD5.
Click the Apply button to accept the changes made.
Password Recovery
This window is used to display and configure the password recovery settings. For example, the administrator may
need to update a user account because the password has been forgotten.
To view the following window, click Management > Password Recovery, as shown below:
Figure 4-5 Password Recovery Window
The fields that can be configured are described below:
Parameter Description
Password Recovery State Select to enable or disable the password recovery feature here. Enabling this
feature allows access to the reset configuration mode in the CLI. From the reset
configuration mode, user accounts can be updated, the enable password
feature can be updated for administrator privilege levels, and the AAA feature
can be disabled to allow local authentication. The running configuration can
then be saved as the startup configuration. A reboot is required.
Click the Apply button to accept the changes made.
Login Method
This window is used to display and configure the login method for each management interface that is supported by the
Switch.
Loading ...
Loading ...
Loading ...