Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
274
Parameter Description
This parameter is only available in the protocol type TCP and UDP.
Destination Port Select and enter the destination port value here. Options to choose from are =,
>, <, ≠, Range, and Mask.
• When selecting the = option, the specific selected port number will be
used.
• When selecting the > option, all ports greater than the selected port, will
be used.
• When selecting the < option, all ports smaller than the selected port, will
be used.
• When selecting the ≠option, all ports, excluding the selected port, will be
used.
• When selecting the Range option, the start port number and end port
number selected, of the range, will be used. Alternatively, the port
number(s) can manually be entered in the space(s) provided, if the port
number(s) is/are not available in the drop-down list.
• When selecting the Mask option, the specified destination port number
and mask will be used. Enter the destination port mask value in the space
provided. The range is from 0x0 to 0xFFFF.
This parameter is only available in the protocol type TCP and UDP.
Specify ICMP Message
Type
Select the ICMP message type used here.
This parameter is only available in the protocol type ICMP.
ICMP Message Type When the ICMP Message Type is not selected, enter the ICMP Message Type
numerical value used here. The range is from 0 to 255. When the ICMP
Message Type is selected, this numerical value will automatically be entered.
This parameter is only available in the protocol type ICMP.
Message Code When the ICMP Message Type is not selected, enter the Message Code
numerical value used here. The range is from 0 to 255. When the ICMP
Message Type is selected, this numerical value will automatically be entered.
This parameter is only available in the protocol type ICMP.
IP Precedence Select the IP precedence value used here. Options to choose from are routine
(0), priority (1), immediate (2), flash (3), flash-override (4), critical (5),
internet (6), and network (7).
• Value - The IP precedence value can also manually be entered here. The
range is from 0 to 7.
• Mask - Enter the IP precedence mask value here. The range is from 0x0
to 0x7.
ToS
Select the Type-of-Service (ToS) value that will be used here. Options to
choose from are normal (0), min-monetary-cost (1), max-reliability (2), max-
throughput (4), and min-delay (8).
• Value - The ToS value can also manually be entered here. The range is
from 0 to 15.
• Mask - Enter the ToS mask value here. The range is from 0x0 to 0xF.
DSCP Select the DSCP value that will be used here. Options to choose from are
default (0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31
(26), af32 (28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3
(24), cs4 (32), cs5 (40), cs6 (48), cs7 (56), and ef (46).
• Value - The DSCP value can also manually be entered here. The range is
from 0 to 63.
• Mask - Enter the DSCP mask value here. The range is from 0x0 to 0x3F.
Loading ...
Loading ...
Loading ...