Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
142
Parameter Description
If Ethernet ring nodes running ITU-T G.8032v1 and ITU-T G.8032v2 co-exist on
an Ethernet ring, the following configurations should be made on the G.8032v2
device:
• All physical ring IDs must have the default value of 1.
• The major ring instance and sub-ring instance of the interconnection node
must have different R-APS VLAN IDs.
• Manual switch or force switch command must not exist.
• The physical ring must have only one instance.
Click the Apply button to accept the changes made.
The fields that can be configured in Ethernet Ring G.8032 are described below:
Parameter Description
Ring Name Enter the Ethernet Ring Protection (ERP) instance name here. This name can
be up to 32 characters long.
Click the Apply button to create an ITU-T G.8032 ERP physical ring.
Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring.
Click the Show Detail button to view the ITU-T G.8032 ERP physical ring status information.
Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After click the Edit Ring button, the following window will appear.
Figure 5-523 ERPS (Edit Ring) Window
The fields that can be configured are described below:
Parameter Description
Instance ID Select the checkbox and enter the ERP instance number here. This value must
be between 1 and 32. Select the Specify radio button to configure this
parameter as normal. Select the None radio button to revert this parameter to
the default setting.
Sub Ring Name Select the checkbox and enter the physical ring’s sub-ring name here. This
name can be up to 32 characters long. Select the Specify radio button to
configure this parameter as normal. Select the None radio button to revert this
parameter to the default setting.
Port0 Select the checkbox and then select the Switch unit ID and the port number
that will be the first ring port of the physical ring. Select the Specify radio button
to configure this parameter as normal. Select the None radio button to revert
this parameter to the default setting.
Loading ...
Loading ...
Loading ...