Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
19
Parameter Description
PD Alive State Select to enable or disable the state of the PoE alive function on the specified
port(s) here.
PD IP Address Enter the IPv4 address of the target PD here.
Poll Interval Enter the poll interval value here. The range is from 10 to 300 seconds. This is
the interval at which ping requests will be sent to the target PD to check the
status.
Retry Count Enter the retry count value here. The range is from 0 to 5. This is the amount of
times that the ping request will be resend if the target PD does not respond.
Waiting Time
Enter the waiting time value here. The range is from 30 to 300 seconds. This is
the time the Switch will wait for the PD to recover from rebooting.
Action Select the action that will be taken here. Options to choose from are:
• Reset - Specifies to reset the PoE port state.
• Notify - Specifies to send logs and traps to notify the administrator.
• Both - Specifies to send logs and traps and then to reset the PoE port
state.
Click the Apply button to accept the changes made.
PoE Statistics
This window is used to display and clear the PoE statistics on the Switch ports.
To view the following window, click System > PoE > PoE Statistics, as shown below:
Figure 3-156 PoE Statistics Window
The fields that can be configured for PoE Statistics Table are described below:
Parameter Description
Unit Select the stacking unit ID of the Switch that will be used here.
Click the Clear All button to clear PoE statistics for all ports.
Click the Clear button to clear the PoE statistics for the corresponding port.
Loading ...
Loading ...
Loading ...