Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
156
The fields that can be configured in IGMP Snooping AAA Settings are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the range of ports that will be used for this configuration here.
Authentication
Select to enable or disable authentication here. This is used to enable or
disable the authentication function for IGMP join messages. When enabled and
the client wants to join a group, the system will perform authentication first.
Click the Apply button to accept the changes made.
The fields that can be configured in IGMP Snooping AAA Table are described below:
Parameter Description
Unit Select the Switch unit that will be used for this display here.
From Port - To Port Select the range of ports that will be used for this display here.
Click the Find button to generate the display based on the selections made.
Click the Show All button to display all the available entries.
IGMP Snooping Groups Settings
This window is used to display and configure the IGMP snooping static group, and view IGMP snooping group.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Groups Settings, as shown below:
Figure 5-679 IGMP Snooping Groups Settings Window
The fields that can be configured in IGMP Snooping Static Groups Settings are described below:
Parameter Description
VID Enter a VLAN ID of the multicast group. The range is from 1 to 4094.
Group Address Enter an IP multicast group address.
Unit Select the Switch unit that will be used for this configuration here.
Loading ...
Loading ...
Loading ...