Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
231
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Interface Setting,
as shown below:
Figure 6-69 IGMP Interface Settings Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN Enter the interface VLAN ID used here. This value must be between 1 and
4094.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to modify the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 6-70 IGMP Interface Settings (Edit) Window
The fields that can be configured are described below:
Parameter Description
Version Select the IGMP version. Options to choose from are 1, 2, and 3. The default
version is 3.
State Select this option to enable or disable the IGMP protocol state. The default
state is disabled.
Query Interval
Enter the interval at which the router sends IGMP general query messages
periodically. The range is from 1 to 31744. The default value is 125.
Query Max Response Time Enter the query maximum response time, in seconds, advertised in IGMP
queries. The range is from 1 to 25. The default value is 10.
Robustness Variable Enter the robustness variable used in IGMP. The range is from 1 to 7. The
default value is 2.
Last Member Query Interval
Enter the interval at which the router sends IGMP group-specific or group-
source-specific (channel) query messages. The default value is 1.
Subscriber Source IP
Check
Select to enable or disable the Subscriber Source IP Check feature here. The
default state is enabled.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Loading ...
Loading ...
Loading ...