Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
163
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Groups
Settings, as shown below:
Figure 5-715 MLD Snooping Groups Settings Window
The fields that can be configured in MLD Snooping Static Groups Settings are described below:
Parameter Description
VID Enter the VLAN ID of the multicast group here. The range is from 1 to 4094.
Group Address Enter the IPv6 multicast group address here.
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the appropriate port range used for the configuration here.
VID Click the radio button and enter a VLAN ID of the multicast group. The range is
from 1 to 4094.
Group Address Click the radio button and enter an IP multicast group address.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured in MLD Snooping Groups Table are described below:
Parameter Description
VID
Click the radio button and enter a VLAN ID of the multicast group. The range is
from 1 to 4094.
Group Address Click the radio button and enter an IP multicast group address.
Detail Select this option to display the MLD group detail information.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Loading ...
Loading ...
Loading ...