Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
328
Parameter Description
URL Select the location from the drop-down list and enter the URL where the DHCP
snooping database will be stored to here. Locations to choose from are TFTP,
FTP, and Flash. An example URL is given.
Click the Apply button to accept the changes made.
Click the Clear button to clear all the counter information.
DHCP Snooping Binding Entry
This window is used to display and configure the DHCP snooping binding entries.
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Binding
Entry, as shown below:
Figure 9-43 DHCP Snooping Binding Entry Window
The fields that can be configured are described below:
Parameter Description
MAC Address Enter the MAC address of the DHCP snooping binding entry here.
VID
Enter the VLAN ID of the DHCP snooping binding entry here. This value must
be between 1 and 4094.
IP Address Enter the IP address of the DHCP snooping binding entry here.
Unit Select the Switch unit that will be used for this configuration here.
Port Select the appropriate port used for the configuration here.
Expiry Enter the expiry time value used here. This value must be between 60 and
4294967295 seconds.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Loading ...
Loading ...
Loading ...