Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
115
Click the Back button to discard the changes made and return to the previous page.
Super VLAN
This window is used to display and configure the super VLAN settings. This is used to specify a VLAN as a super
VLAN. Super VLANs are used to aggregate multiple sub-VLANs (Layer 2 broadcast domains) into an IP subnet. A
super VLAN cannot have any physical member port. A super VLAN cannot be a sub-VLAN at the same time. Once an
IP interface is bound to a super VLAN, the proxy ARP will be enabled automatically on the interface for
communication between its sub-VLANs. Multiple super VLANs can be configured and each super VLAN can consist of
multiple sub-VLANs.
Private VLAN and super VLAN are mutually exclusive. A private VLAN cannot be configured as a super VLAN. Layer
3 routing protocols, multicast protocols, and the IPv6 protocol cannot run on a super VLAN interface.
To view the following window, click L2 Features > VLAN > Super VLAN, as shown below:
Figure 5-27 Super VLAN Window
The fields that can be configured in Add Super VLAN are described below:
Parameter Description
Super VID List Enter the super VLAN ID(s) that will be created here.
Click the Apply button to accept the changes made.
The fields that can be configured in Add Sub VLAN are described below:
Parameter Description
Super VID Enter the super VLAN ID that will be associated with the sub-VLAN(s) here.
The range is from 1 to 4094.
Sub VID List Enter the sub-VLAN ID(s) that will be associated with the super VLAN here.
Click the Apply button to accept the changes made.
The fields that can be configured in Find Super VLAN are described below:
Parameter Description
Super VID Enter the super VLAN ID that will be displayed here. The range is from 1 to
4094.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the available entries.
Loading ...
Loading ...
Loading ...