Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
247
After clicking the Edit button next to the IPv6 Address Family entry, the following window will appear:
Figure 6-93 VRRPv3 Settings (Edit, IPv6) Window
The fields that can be configured are described below:
Parameter Description
Virtual IPv6 Address
Enter the virtual IPv6 address here. All routers in the same VRRP group must
be configured with the same virtual router ID and virtual address. The IPv6
address of the virtual router can be a real address configured on the routers or
an unused address. If the virtual address is equal to the real address of the
interface, this virtual router is the IPv6 address owner.
Advertisement Interval Enter the time interval value between successive advertisements by the master
router here. The range is from 100 to 4095 centi-seconds. The master will
constantly send VRRP advertisements. All virtual routers in a VRRP group
must use the same timer values.
Preemption Select to enable or disable the preemption feature here. This is used to allow a
router to take over the master role if it has a better priority than the current
master.
Priority
Enter the priority value of the virtual router here. The range is from 1 to 254.
The master of a VRRP group is elected based on the priority. The virtual router
with the highest priority becomes the master and others with lower priorities act
as the backup for the VRRP group. If there are multiple routers with the same
highest priority value, the router with the larger IP address will become the
Master. The router that is the IPv6 address owner of the VRRP group is always
the master of the VRRP group, and has the highest priority of 255.
Critical IPv6 Address Enter the critical IPv6 address here. If the critical IPv6 is configured on one
virtual router, the virtual router cannot be activated when the critical IPv6
address is unreachable. One VRRP group can only track one critical IPv6
address.
Name Specifies the interface of critical IPv6 address which is link-local address to be
used.
Non-owner ping Select to enable or disable the non-owner ping feature here. This is used to
enable a non-IPv6 address owner virtual router in the master state to respond
to ND requests for IPv6 addresses.
Shutdown Select to enable or disable the shutdown feature here. Avoid the common
mistake of shutting down the IPv6 address owner routers before shutting down
other non-owner routers.
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...