Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
417
Figure 11-87 sFlow Agent Information Window
sFlow Receiver Settings
This window is used to display and configure receivers for the sFlow agents. Receivers cannot be added to or
removed from the sFlow agent.
To view the following window, click Monitoring > sFlow > sFlow Receiver Settings, as shown below:
Figure 11-98 sFlow Receiver Settings Window
The fields that can be configured are described below:
Parameter Description
Receiver Index
Enter the index number of the receiver here. This number must be between 1
and 4.
Owner Name Enter the owner name of the receiver here. This name can be up to 32
characters long.
Expire Time
Enter the expiration time for the entry here. The parameters of the entry will
reset when the timer expired. The range is from 0 to 2000000 seconds.
Selecting Infinite specifies that the entry will not expire.
Max Datagram Size Enter the maximum number of data bytes of a single sFlow datagram here. The
range is from 700 to 1400 bytes. By default, this value is 1400 bytes.
Collector Address Enter the remote sFlow collector’s IPv4 or IPv6 address here.
UDP Port
Enter the remote sFlow collector’s UDP port number here. This number must
be between 1 and 65535. By default, this value is 6343.
Click the Apply button to accept the changes made.
Click the Reset button to reset the specified entry’s settings to the default settings.
sFlow Sampler Settings
This window is used to display and configure the sFlow sampler settings.
To view the following window, click Monitoring > sFlow > sFlow Sampler Settings, as shown below:
Loading ...
Loading ...
Loading ...