Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
203
Click the Delete button to delete an entry based on the information entered.
Click the Edit button to configure the specific entry.
After clicking the Edit button, the following page will appear.
Figure 6-30 RIP interface (Edit) Window
The fields that can be configured in Configure RIP interface are described below:
Parameter Description
Send Version
Select a RIP version to send on the interface. Options to choose from are
v1(RIPv1) and v2(RIPv2).
Receive Version Select a RIP version or both to receive on the interface. Options to choose from
are v1(RIPv1), v2(RIPv2) and v1/v2(Both).
Send v2-broadcast Select to enable or disable the sending of version 2 RIP update packets as
broadcast packets instead of multicast packets.
Authentication Mode Select to disable or enable text authentication mode.
Authentication Text
Password
Enter the authentication text password. It will be used if authentication mode is
enabled. The password can be up to 16 characters long.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
RIP Database
This window is used to display the Routing Information Protocol (RIP) routing database. Summary address entries will
appear in the database only if relevant child routes exist and are being summarized. When the last child route for a
summary address becomes invalid, the summary address is also removed from the routing table.
To view the following window, click L3 Features > RIP > RIP Database, as shown below:
Figure 6-191 RIP Database Window
The fields that can be configured are described below:
Parameter Description
Network Address Enter the subnet prefix and the prefix length of the network(s) to be displayed
here.
Loading ...
Loading ...
Loading ...