Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
131
After clicking the Add Rule button next to an Ethernet-IP type profile, the following page will appear.
Figure 5-45 VLAN Mapping Profile (Ethernet-IP, Add Rule) Window
The fields that can be configured are described below:
Parameter Description
Rule ID
Enter the VLAN mapping rule ID here. If not specified, the rule ID begins from
10 and is incremented by 10 for every new rule. The range is from 1 to 10000
Src-MAC Address Enter the source MAC address here.
Dst-MAC Address Enter the destination MAC address here.
Priority Select the 802.1p priority value here. The range is from 0 to 7. A higher value
has a higher priority.
Inner VID Enter the inner VLAN ID here. The range is from 1 to 4094.
Ethernet Type Enter the Ethernet type value here. The range is from 0x0 to 0xFFFF.
Src-IP Address Enter the source IPv4 address and subnet mask here.
Dst-IP Address Enter the destination IPv4 address and subnet mask here.
DSCP Enter the DSCP value here. The range is from 0 to 63.
Source Port Enter the source TCP/UDP port number here. The range is from 1 to 65535.
Destination Port Enter the destination TCP/UDP port number here. The range is from 1 to
65535.
IP Protocol Enter the Layer 3 IP protocol value here. The range is from 0 to 255.
Action Select the action that will be taken here. Options to choose from are Dot1q-
Tunnel and Translate.
• Dot1q-Tunnel - Specifies that the outer-VID will be added for matched
packets.
• Translate - Specifies that the outer-VID will replace the outer-VID of the
matched packets.
New Outer VID Enter the new outer VLAN ID here. The range is from 1 to 4094.
Loading ...
Loading ...
Loading ...