Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
207
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Process Settings, as shown below:
Figure 6-35 OSPFv2 Process Settings Window
Click the Edit button to modify the specified entry.
Click the Show Detail button to view more detailed information associated with the entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 6-236 OSPFv2 Process Settings (Edit) Window
The fields that can be configured are described below:
Parameter Description
OSPF State Select to enable or disable the OSPFv2 state.
Router ID Enter the router ID in the IPv4 address format here. The router ID is a 32-bit
number assigned to each router running the OSPF protocol. This number
uniquely identifies the router within an AS. Each router has a unique router ID.
Default Metric Enter the default metric value used here. The range is from 1 to 16777214.
Type
Select the distance setting type here. Options to choose from are Intra-Area,
Inter-Area, External-1, and External-2.
• Inter-Area - Specifies the distance for OSPF inter-area routes.
• Intra-Area - Specifies the distance for OSPF intra-area routes.
• External-1 - Specifies the distance for OSPF external type-5 and type-7
routes with a type-1 metric.
• External-2 - Specifies the distance for OSPF external type-5 and type-7
routes with a type-2 metric.
Distance Enter the administrative distance value here. The range is from 1 to 255.
State Select to enable or disable the Default Originate Information state here. This
feature is used to generate a default external route (type-5 LSA) network
0.0.0.0 to the AS.
Originate Select the Originate option here. Options to choose from are Always and
None. Selecting the Always option specifies to always generate the default
route regardless of existence of a default route in the routing table.
Metric
Enter the cost value associated with the generated default route here. If not
specified, the default metric cost is 1. The range is from 1 to 65535.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...