Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
215
If no metric value is specified by the default metric, routes redistributed from other protocols will get a metric value of
20.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Redistribute Settings, as shown
below:
Figure 6-45 OSPFv2 Redistribute Settings Window
The fields that can be configured are described below:
Parameter Description
Protocol Select the source protocol that will be redistributed here. Options to choose
from are Connected, Static and RIP. For routing protocols like Open Shortest
Path First (OSPF), these routes will be redistributed as external to the
autonomous system.
Metric Type Select the metric type here. Options to choose from are External Type-1 and
External Type-2. This specifies the external link type of the route being
redistributed into the OSPF routing domain. If a metric type is not specified, the
Switch will adopt a Type-2 external route.
Metric Enter the metric value for the redistributed routes here. The range is from 1 to
16777214.
Route Map Name
Enter the route map name here that filters the imported routes from this source
routing protocol. If not specified, all routes are redistributed.
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
OSPFv2 Virtual Link Settings
This window is used to display and configure OSPFv2 virtual link settings. If a non-zero area is not physically
connected to the zero area, it must be connected to the zero area via a virtual link. The virtual link is a point-to-point
link. The router will send the OSPF message to the neighbor router as unicast IP packet.
Loading ...
Loading ...
Loading ...