Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
169
Figure 5-81 Multicast VLAN Settings Window
The fields that can be configured in Multicast VLAN Global Settings are described below:
Parameter Description
Multicast VLAN IPv4 State
Select to enable or disable the IPv4 IGMP control packet process in multicast
VLANs.
Forward Unmatched Select the enable or disable the Forward Unmatched feature here. This
specifies that if the received IGMP or MLD control packet is untagged, does not
match any profile, and the associated default VLAN is a multicast VLAN, or is
tagged with a multicast VLAN, but does not match the associated profile, then
the packet will be forwarded or dropped based on this setting. By default, the
packet will be dropped.
Multicast VLAN IPv6 State
Select to enable or disable the IPv6 MLD control packet process in multicast
VLANs.
Ignore VLAN Select the enable or disable the ignore VLAN feature here. This specifies the
setting for tagged IGMP or MLD control packets. If enabled, then the packet’s
VLAN is ignored and taken to match the profile to find its multicast VLAN. When
this option is enabled, the Switch will ignore the VLAN of the receiving IGMP or
MLD control packet and try to find a match profile.
VID
Enter the VLAN ID of the multicast VLAN that will be created or deleted here.
The range is 2 to 4094.
VLAN Name Enter the VLAN name of the multicast VLAN that will be created or deleted
here.
Click the Apply button to accept the changes made.
Click the Delete button to delete an entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
The fields that can be configured in Member Port Settings are described below:
Parameter Description
VID Enter the multicast VLAN ID that will be used here. The range is 2 to 4094.
Action Select Add to add a new entry based in the information entered.
Loading ...
Loading ...
Loading ...