Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
263
Click the Apply button to accept the changes made.
The fields that can be configured for Traffic Policy are described below:
Parameter Description
Policy Map Name Enter the policy map name here. This name can be up to 32 characters long.
Class Map Name Enter the class map name here. This name can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Set Action button to configure the set action settings for the specified entry.
Click the Policer button to configure the policer settings for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Set Action button, the following page will appear.
Figure 7-17 Policy Map (Set Action) Window
The fields that can be configured are described below:
Parameter Description
None Select this option to specify that no action will be taken.
Specify
Select this option to specify that action will be taken based on the
configurations made.
New Precedence Select the new precedence value for the packet here. The range is from 0 to 7.
Select the IPv4 only option to specify that IPv4 precedence will be marked
only. If not selected, then both IPv4 and IPv6 precedence will be marked. For
IPv6 packets, the precedence is the most three significant bits of the traffic
class of the IPv6 header. Setting the precedence will not affect the CoS queue
selection.
New DSCP Select the new DSCP value for the packet here. The range is from 0 to 63.
Select the IPv4 only option to specify that the IPv4 DSCP will be marked only.
If not selected, then both the IPv4 and IPv6 DSCP will be marked. Setting the
DSCP will not affect the CoS queue selection.
New CoS Select the new CoS value to the packet here. The range is from 0 to 7. Setting
the CoS will not affect the CoS queue selection.
New Cos Queue Select the new CoS queue value to the packets here. This will overwrite the
original CoS queue selection. Setting the CoS queue will not take effect if the
policy map is applied for the egress flow on the interface.
Click the Back button to return to the previous window.
Loading ...
Loading ...
Loading ...