Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
184
Figure 6-2 ARP Aging Time Window
The fields that can be configured are described below:
Parameter Description
Timeout After click the Edit button, enter the ARP aging timeout value here.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Static ARP
This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
Figure 6-3 Static ARP Window
The fields that can be configured are described below:
Parameter Description
IP Address Enter the IP address that will be associated with the MAC address here.
Hardware Address Enter the MAC address that will be associated with the IP address here.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Proxy ARP
This window is used to display and configure the Proxy ARP settings. The Proxy ARP feature will allow the Switch to
reply to ARP requests destined for another device by faking its identity (IP and MAC Address) as the original ARP
responder. Therefore, the Switch can then route packets to the intended destination without configuring static routing
or a default gateway. The host, usually a Layer 3 Switch, will respond to packets destined for another device.
To view the following window, click L3 Features > ARP > Proxy ARP, as shown below:
Loading ...
Loading ...
Loading ...