Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
252
Parameter Description
• When Bandwidth is selected, enter the input/output bandwidth value
used in the space provided. This value must be between 8 and
10000000 kbps. Also, enter the Burst Size value in the space
provided. This value must be between 0 and 128000 kilobytes.
• When Percent is selected, enter the input/output bandwidth
percentage value used in the space provided. This value must be
between 1 and 100 percent (%). Also, enter the Burst Size value in the
space provided. This value must be between 0 and 128000 kilobytes.
• Select the None option to remove the rate limit on the specified port(s).
The specified limitation cannot exceed the maximum speed of the
specified interface. For the ingress bandwidth limitation, the ingress will
send a pause frame or a flow control frame when the received traffic
exceeds the limitation.
Click the Apply button to accept the changes made.
Queue Rate Limiting
This window is used to display and configure the queue rate limiting settings.
To view the following window, click QoS > Basic Settings > Queue Rate Limiting, as shown below:
Figure 7-6 Queue Rate Limiting Window
The fields that can be configured are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the range of ports that will be used for this configuration here.
Queue ID Select the queue ID that will be configured here. Options to choose from are 0
to 7.
Rate Limit Select and enter the queue rate limit settings here.
• When the Min Bandwidth option is selected, enter the minimum
bandwidth rate limit value in the space provided. This value must be
between 8 and 10000000 kbps. Also enter the maximum bandwidth
(Max Bandwidth) rate limit in the space provided. This value must be
between 8 and 10000000 kbps.
Loading ...
Loading ...
Loading ...