Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
236
PIM RP Address page
This window is used to display and configure the PIM RP address settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP
Address, as shown below:
Figure 6-79 PIM RP Address Window
The fields that can be configured are described below:
Parameter Description
RP Address Specifies the IP address of the RP.
Group Address Specifies the IP multicast group address.
Group Mask Specifies the IP multicast group mask.
Click the Add button to add the PIM RP address.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
PIM RP Candidate page
This window is used to display and configure the PIM RP candidate settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP
Candidate, as shown below:
Figure 6-80 PIM RP Candidate Window
The fields that can be configured are described below:
Parameter Description
Priority Specifies the RP priority value. The range is from 0 to 255. The default value is
192.
Interval Specifies the RP candidate advertisement interval. The range is from 1 to
16383 seconds. If not specified, The default value is 60 seconds.
Wildcard Prefix Count Specifies to set the wildcard (224.0.0.0/4) prefix count 1 or 0 in C-RP message.
The default value is 0.
Loading ...
Loading ...
Loading ...