D-Link DGS-3130 Gigabit Layer 3 Stackable Managed Switches

User Manual - Page 209

For DGS-3130.

PDF File Manual, 489 pages, Read Online | Download pdf file

DGS-3130 photo
Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
198
Parameter Description
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IPv6 Route Table
This window is used to display and configure the IPv6 route table.
To view the following window, click L3 Features > IPv6 Route Table, as shown below:
Figure 6-144 IPv6 Route Table Window
The fields that can be configured are described below:
Parameter Description
IPv6 Address Select and enter the IPv6 address to display here.
IPv6 Address/Prefix Length
Select and enter the IPv6 address and prefix length to display here. Select the
Longer Prefixes option to display IPv6 routes with prefixes greater than and
equal to the prefix length.
Interface Name Select and enter the name of the interface to display here.
Connected Select this option to display only connected routes.
RIPng Select this option to display only RIPng routes.
OSPFv3 Select this option to display only OSPFv3 routes.
Database Select this option to display all the related entries in the routing database
instead of just the best route.
Summary
Select this option to display a summary and count of the route sources
configured on this Switch.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Route Preference
This window is used to display and configure the route preference settings. Use this window to configure the distance,
which represents the route's trust rating. The route with a lower distance value is preferred over the route with a higher
distance value. A route with the distance 255 will not be installed for routing of packets since it indicates that the route
is not trusted.
To view the following window, click L3 Features > Route Preference, as shown below:
Loading ...
Loading ...
Loading ...