Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
185
Figure 6-4 Proxy ARP Window
The fields that can be configured are described below:
Parameter Description
Proxy ARP State Select to enable or disable the Proxy ARP state here.
Local Proxy ARP State Select to enable or disable the local Proxy ARP state here. This local Proxy
ARP function allows the Switch to respond to the Proxy ARP, if the source IP
and destination IP are in the same interface.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP Table
This window is used to display and configure the ARP table settings.
To view the following window, click L3 Features > ARP > ARP Table, as shown below:
Figure 6-5 ARP Table Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the interface VLAN ID used here. This value must be between 1 and
4094.
IP Address Select and enter the IP address to display here.
Mask After the IP Address option was selected, enter the mask address for the IP
address here.
Hardware Address Select and enter the MAC address to display here.
Type Select the Type option here. Options to choose from are All and Dynamic.
Mgmt Select this option to display the Management port information.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic ARP cache.
Click the Clear button to clear the dynamic ARP cache associated with the specific entry.
Loading ...
Loading ...
Loading ...