Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
225
The fields that can be configured in OSPF Interface Table are described below:
Parameter Description
Interface Name Enter the name of the interface here.
Click the Find button to locate a specific entry based on the information entered.
Click the Interface Name link to access and configure the specified OSPFv3 process.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Interface Name link button, the following page will appear.
Figure 6-61 OSPFv3 Interface Settings (Interface Name) Window
The fields that can be configured are described below:
Parameter Description
Cost
Enter cost value here. It is an integer value expressed as the link-state metric.
The range is from 1 to 65535.
Select the Default option to use the default value.
Hello Interval Enter the Hello Interval value, between the hello packets that the router sends
on an interface here. This value is advertised in the hello packets. The shorter
the Hello Interval, the earlier topological changes will be detected, but more
routing traffic will ensue. This value must be the same for all routers and access
servers on a specific network. The range is from 1 to 65535 seconds.
Select the Default option to use the default value, which is 10 seconds.
Dead Interval Enter the Dead Interval value here, during which no packets are received and
after which a neighbor is regarded as offline. The interval is advertised in router
hello packets. This value must be the same for all routers and access servers
on a specific network. The range is from 1 to 65535 seconds.
Select the Default option to use the default value, which is 40 seconds.
Priority
Enter the priority value of the router here. The range is from 0 to 255. Set the
priority to help determine the OSPF Designated Router (DR) for a network. If
Loading ...
Loading ...
Loading ...