Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
113
Parameter Description
VID After ticking the Native VLAN option the following parameter will be available.
Enter the VLAN ID used for this configuration here. This value must be between
1 and 4094.
Action
Select the action that will be taken here. Options to choose from are All, Add,
Remove, Except, and Replace.
Allowed VLAN Range Enter the allowed VLAN range here.
Clone Select this option to enable the clone feature.
From Port - To Port Select the range of ports that will be used in the clone feature here.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
When 802.1Q-Tunnel was selected as the VLAN Mode, the following page will appear.
Figure 5-24 VLAN Interface (802.1Q-Tunnel) Window
The fields that can be configured are described below:
Parameter Description
VLAN Mode Select the VLAN mode option here. Options to choose from are Access,
Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous,
and Trunk Secondary.
Acceptable Frame Select the acceptable frame behavior option here. Options to choose from are
Tagged Only, Untagged Only, and Admit All.
Ingress Checking Select to enable or disable the ingress checking function.
VID
Enter the VLAN ID used for this configuration here. This value must be between
1 and 4094.
Action Select Add to add a new entry based in the information entered.
Select Remove to remove an entry based in the information entered.
Add Mode Select to add an Untagged parameter.
Allowed VLAN Range Enter the allowed VLAN range here.
Clone Select this option to enable the clone feature.
From Port - To Port Select the range of ports that will be used in the clone feature here.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
Loading ...
Loading ...
Loading ...