D-Link DGS-3130 Gigabit Layer 3 Stackable Managed Switches

User Manual - Page 123

For DGS-3130.

PDF File Manual, 489 pages, Read Online | Download pdf file

DGS-3130 photo
Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
112
The fields that can be configured are described below:
Parameter Description
VLAN Mode Select the VLAN mode option here. Options to choose from are Access,
Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous,
and Trunk Secondary.
Acceptable Frame Select the acceptable frame behavior option here. Options to choose from are
Tagged Only, Untagged Only, and Admit All.
Ingress Checking Select to enable or disable the ingress checking function.
Native VLAN Tick this option to enable the native VLAN function.
VID
After ticking the Native VLAN option the following parameter will be available.
Enter the VLAN ID used for this configuration here. This value must be between
1 and 4094.
Action Select the action that will be taken here. Options to choose from are Add,
Remove, Tagged, and Untagged.
Add Mode Select whether to add an Untagged or Tagged parameters.
Allowed VLAN Range Enter the allowed VLAN range here.
Clone Select this option to enable the clone feature.
From Port - To Port Select the range of ports that will be used in the clone feature here.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
When Trunk was selected as the VLAN Mode, the following page will appear.
Figure 5-23 VLAN Interface (Trunk) Window
The fields that can be configured are described below:
Parameter Description
VLAN Mode Select the VLAN mode option here. Options to choose from are Access,
Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous,
and Trunk Secondary.
Acceptable Frame
Select the acceptable frame behavior option here. Options to choose from are
Tagged Only, Untagged Only, and Admit All.
Ingress Checking After selecting Trunk as the VLAN Mode the following parameter will be
available. Select to enable or disable the ingress checking function.
Native VLAN
Tick this option to enable the native VLAN function. Also select if this VLAN
supports Untagged or Tagged frames.
Loading ...
Loading ...
Loading ...