Loading ...
Loading ...
Loading ...
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
366
Parameter Description
and 2147483647 packets per second. If the low PPS value is not specified, the
default value is 80% of the specified risen PPS.
PPS Low Enter the low packets per second value here. This option specifies the low
threshold value in packets count per second. This value must be between 1
and 2147483647 packets per second. If the low PPS value is not specified, the
default value is 80% of the specified risen PPS.
Click the Apply button to accept the changes made.
After selecting the Kbps option as the Level Type, the following parameters are available.
Figure 9-777 Storm Control (Level Type - Kbps) Window
The additional fields that can be configured in Storm Control Port Settings are described below:
Parameter Description
KBPS Rise Enter the rise KBPS value used here. This option specifies the rise threshold
value as a rate of kilobits per second at which traffic is received on the port.
This value must be between 1 and 2147483647 Kbps.
KBPS Low Enter the low KBPS value used here. This option specifies the low threshold
value as a rate of kilobits per second at which traffic is received on the port.
This value must be between 1 and 2147483647 Kbps. If the low KBPS is not
specified, the default value is 80% of the specified risen KBPS.
Click the Apply button to accept the changes made.
After selecting the Level option as the Level Type, the following parameters are available.
Figure 9-788 Storm Control (Level Type - Level) Window
The additional fields that can be configured in Storm Control Port Settings are described below:
Parameter Description
Level Rise Enter the rise level value used here. This option specifies the rise threshold
value as a percentage of the total bandwidth per port at which traffic is received
on the port. This value must be between 1% and 100%.
Level Low
Enter the low level value used here. This option specifies the low threshold
value as a percentage of the total bandwidth per port at which traffic is received
on the port. This value must be between 1% and 100%. If the low level is not
specified, the default value is 80% of the specified risen level.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...