User Manual - Page 29

For 3075C002.

Loading ...
Loading ...
Loading ...
29
Handling Precautions
z
Do not block shutter curtain operation with your nger or other
objects. Doing so may cause a malfunction.
z
Use only a commercially available blower to blow away dust when it
adheres to the lens, viewnder, etc. Do not use cleaners that contain
organic solvents to clean the camera body or lens. For stubborn dirt,
take the camera to the nearest Canon Service Center.
z
Do not touch the camera’s electrical contacts with your ngers. This
is to prevent the contacts from corroding. Corroded contacts can
cause camera malfunction.
z
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, rst put the camera in a sealed plastic bag and let it
adjust to the warmer temperature before taking it out of the bag.
z
If condensation forms on the camera, do not use the camera. This is
to avoid damaging the camera. If there is condensation, remove the
lens, card and battery from the camera, and wait until condensation
has evaporated before using the camera.
z
If the camera will not be used for an extended period, remove the
battery and store the camera in a cool, dry, well-ventilated location.
Even while the camera is in storage, press the shutter button a few
times once in a while to check that the camera is still working.
z
Avoid storing the camera where there are chemicals that result in
rust and corrosion such as in a chemical lab.
z
If the camera has not been used for an extended period, test all its
functions before using it. If you have not used the camera for some
time or if there is an important shoot such as a foreign trip coming
up, have the camera checked by your nearest Canon Service Center
or check the camera yourself and make sure it is working properly.
z
The camera may become hot after repeated continuous shooting
or still photo/movie shooting over an extended period. This is not a
malfunction.
z
If there is a bright light source inside or outside the image area,
ghosting may occur.
Loading ...
Loading ...
Loading ...