Loading ...
Loading ...
Loading ...
180
Setting the Flash Function
Flash Firing
To enable ash photography, set to
[Enable]. To disable ash ring or
enable only the AF-assist beam, set to
[Disable].
When a Speedlite is attached that supports auto ash ring, you can
also congure the following settings to enable automatic ring as
needed for shooting conditions.
●Set [Flash ring] to [Enable].
●Set the Speedlite to automatic ash mode.
●Set the camera shooting mode to [
A
] or [
d
].
For detailed shooting instructions, refer to the instruction manual of
Speedlites supporting auto ash ring.
E-TTL II Flash Metering
For normal ash exposures, set it to
[Evaluative]. If [Average] is set, the
ash exposure will be averaged for the
entire metered scene. Depending on the
scene, ash exposure compensation
may be necessary. This setting is for
advanced users.
Loading ...
Loading ...
Loading ...