Loading ...
Loading ...
Loading ...
125
Fully Automatic Shooting (Scene Intelligent Auto)
FAQ
z
Focusing is not possible (indicated by an orange AF point).
Aim the AF point over an area with good contrast, then press the
shutter button halfway (p.56). If you are too close to the subject,
move away and shoot again.
z
Multiple AF points are displayed simultaneously.
If multiple AF points are displayed simultaneously, all of these
positions are in focus. As long as one AF point is displayed on the
subject, you can take the picture.
z
Pressing the shutter button halfway does not focus the
subject.
If the focus mode switch on the lens is set to <MF> (manual focus),
set it to <AF> (autofocus).
z
The shutter speed display is blinking.
Since it is too dark, taking the picture may result in a blurred subject
due to camera shake. Using a tripod or a Canon EL/EX series
Speedlite (sold separately, p.177) is recommended.
z
When the external ash was used, the bottom part of the
picture came out unnaturally dark.
If a hood is attached to the lens, it may obstruct the ash light. If the
subject is close, detach the hood before taking the picture with ash.
Loading ...
Loading ...
Loading ...